Teeth Wheel storage container

This was designed by my 10 year old. It's a teeth wheel storage container. It's got threads for easy open and close.

Cool decor for your office, workshop etc. Store paper clips, pins, sewing needles or usb drive. Kids may want to keep secret notes inside.

The model consists of 4 parts:

• Base container
• The Lid
• 2x small teeth wheels to glue on with super glue.

For easy of printing we decided to print the small teeth wheels and glue them on after with a dab of super glue.

Two versions available:

1. Has a smaller, thinner thread. (Good for tuned printers) Uses lower layer height.
2. Has a thicker thread, easy to 3D print, using 0.2mm layers.

Note: If your thread is a bit tight, slowly twist them back and forth, or even better add a little bit of lube to the thread. It has built in allowance so should screw together easily if your printer and filament is tuned. We tested with PLA and SilkPLA

Enjoy.