Holder / Stand / Storage for Card Games

About

Holder and stand for game cards that are less than 58mm / 2.3" wide. The holder can be swiveled to the active player. 

I designed this to help the kids have a tidy draw pile during play. It also makes for a nice storage for each of the card games that they have.  

Printing

• The Holder with the swivel cap is a print-in-place design. Please use 0.4mm nozzle. No support is required.
• The print profile that I've uploaded has options for single- and two-color printing.

Assembly

• (Optional) To add some weight to the stand, you can fill the removable Base with some gravel secured with lightly-diluted PVA white glue or epoxy. Do not fill above the lip on the inside of the Base as this will interfere with the swivel function.
• Secure the Holder to the Base by fitting the two parts together and turning anti-clockwise till it locks into place.
• The swivel mechanism will become smoother after some use.

Please give a like or follow if you like this model. Check out my other models too! TYSM.

___