FULL COLOR DECK !!
Haven't found card like these in full color with the deck so I drew them myself.
Mattel gonna be pissed. You kno da drill.

DOWNLOAD IT BEFORE WILL BE TAKEN DOWN !! 🔥🔥🔥

Ok just to write something serious:
_ If you make yellow or red faced cards, you have 4 colors and you're good.

- BLUE and GREEN faced cards: In case u haven't done 5 colors before just send the print and in the usual window 5 color slots will appear. I.e. assign every color as usual, then assign the 5th color to the slot where you have the YELLOW.

Machine will do, If I remember correctly, the first 2 layers like white, then black, then red, then yellow - 2nd layer yellow - red - white black - 3rd black and so.

Setting like this, yello will be the 1st color to end being used. As soon as the AMS ends unloading the yellow filament, you can switch it for the card color one (say blue or green, since yellow and red are taken), leave the machine working and go get a beer.

- Optimal would be all MATTE PLA. Low transparency. Amazon Basics has a nice PLA with low TD but their spools don't fit on AMS dammnit.
In case you have matte colors can scale the Z height to 0.6mm and set layer height and 1st layer height at 0.10mm.
Same if you got hard stone ballz you can set Z at 0.48mm and all layers heights at 0.08mm
Then post the print profile to flex it.

- So you read until here for the rules of this amazing game:
Well dude who am I to set the rules? I already made the cards! :)

-H