Famous Francesco Totti art

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x229.17mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Elegoo Black Transmission Distance: 0.5
PLA Elegoo Red Transmission Distance: 5.6
PLA Elegoo Orange Transmission Distance: 8
PLA Elegoo Yellow Transmission Distance: 3.5
PLA Elegoo White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.