Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 157.14x220mm in size, you may resize but please do not adjust the Z height.

Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Jade White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #16 (1.36mm) swap to Blue
At layer #20 (1.68mm) swap to White for the rest.