Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. 

If you find this model useful, feel free to buy me a coffee. 

Here are small containers for hiding geocaches and treasure hunt prizes. They're also great for organizing small doo-dads.

There are 5 height sizes and 3 styles.

All have diameters of 70.2mm outside and 58mm inside. 

The heights are:

• 11mm
• 14mm
• 20mm
• 26mm
• 32mm
• 38mm

The styles are:

• Regular
• Hanger (has a hole that you can use to hang on a nail or screw)
• Magnetized (has cutouts for 6mm wide by 3mm tall magnets: https://bit.ly/3UjlY3C )

The smaller sizes are great for stashing keys, dogtags, and other flat items. Use the larger sizes for bigger prizes and doo-dad storage.

I recommend printing a single top/bottom test before you print more. If the threads are too tight or too loose, adjust X/Y Compensation (Prusaslicer) or Horizontal Expansion (Cura). A negative X/Y Compensation value will make the threads looser. (For example, -0.1mm.)

For the magnetic version, glue the magnets in with superglue or your preferred adhesive. A negative X/Y Compensation value will also make the magnet holes larger.