Raspberry Pi 5 Enclosure Case with Drawer

Copyright Claim

Raspberry Pi 5 Enclosure Case with Drawer

Boost
5
10
0

Print Profile(4)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

4 Plates: With Corner Tabs
4 Plates: With Corner Tabs
Designer
3.9 h
4 plates

One Plate: With Corner Tabs
One Plate: With Corner Tabs
Designer
3.2 h
1 plate

4 Plates: Without Corner Tabs
4 Plates: Without Corner Tabs
Designer
3.9 h
4 plates

One Plate: Without Corner Tabs
One Plate: Without Corner Tabs
Designer
3.2 h
1 plate

Boost
5
10
0
0
5
0
Released

Description

Enclosure case designed specifically for the Raspberry Pi 5 + low-profile cooler.

  • M2.5x6mm screws required to keep the Pi in place.
  • If you want to use the feet, they will need a small dab of super glue.
  • Full clearance and support for low-profile coolers.
  • Drawer for storing USB sticks or extra micro SD cards.
  • This case does allow access to the SD card slot, USB-C power, both micro HDMI ports, the USB 2.0 and 3.0 ports and the ethernet port.
  • This case does not support any modular HATs or large coolers; it is intended to be a simple solution to protect the stock Pi + low-profile cooler.

Printing Guidelines:

  • This model is designed to be printed with a 0.4mm nozzle, 0.2mm layer height and at least 3 wall loops; but you may adjust this to your liking.
  • Support is required for the large cutouts, I prefer to use the Normal (Auto) supports in the Snug style.
  • The print profile prints have tabs on the 4 corners of the case and top panel to ensure the corners don't curl up. These are easy to cut off after the print.
  • Printing the drawer in a different colour to the case creates a contrasting pattern at the front of the case.

Bill of Materials

Purchase from Bambu Store

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more