HUEFORGE M2CS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4 PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black

At layer #7 (0.64mm) swap to Red
At layer #11 (0.96mm) swap to Blue
At layer #14 (1.2mm) swap to White for the rest.