Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 185.21x103.04mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.1mm
Filaments Used:
PLA+ Generic black Transmission Distance: 5
PLA+ Generic grey Transmission Distance: 5
PLA+ Generic silver Transmission Distance: 5
PLA+ Generic off white Transmission Distance: 5
PLA+ Generic White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with black
At layer #11 (0.96mm) swap to grey
At layer #14 (1.2mm) swap to silver
At layer #17 (1.44mm) swap to off white
At layer #19 (1.6mm) swap to White for the rest.
Dim 2
power 1.0
Combo
brightness adjust.08
You can print 7 colors with a 4 color AMS…just swap out filament in the first three slots and each filament role completes its color designation.