I recently purchased a 6 deck auto card shuffler from Amazon for around $25 USD.

This is a new design of the card tray with the following design improvements:

• Less gaps between the tray and the chamber walls to help ensure cards do not fall past the tray and into the bottom of the chamber
• New “drop” tabs on the front of the tray allowing you to easily drop the tray into place from the top rather than needing to depress the chamber slider all the way to the bottom
• Internal support structures at the bottom for improved rigidity and strength (print the angle brackets in the primary filament color)
• Created Hogwarts Battle Themed tray (secondary filament color)

The writing is quite tiny and I strongly recommend you use a 0.2mm nozzel to print. I have provided a Print Profile for the 0.2mm nozzle. I have slowed printing speeds down for the lettering objects to allow for a better quality print.

If you would just like the improvements and you are not interested in the branding; please consider the “Not Branded” version and using a larger nozzle size.