****WARNING: This print requires a very high TD Green****

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 67.73x90mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA BambuLab Basic Blue Gray Transmission Distance: 2
PLA Chrominal Serpent Green Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA PolyLite Cream Transmission Distance: 2.9
This print uses 4 unique filaments

Swap Instructions:
Start with Blue Gray
At layer #12 (1.04mm) swap to Serpent Green
At layer #17 (1.44mm) swap to Ivory White
At layer #20 (1.68mm) swap to Cream
At layer #22 (1.84mm) swap to Ivory White for the rest.