Hueforge - GT3 RS Blueprint
Boost
9
4
3
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
9
4
3
0
9
6
Released
Description
Porsche 911 GT3 RS
Dimensions: 200.00mm x 133.40mm x 1.92mm (length, height, depth)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic White Transmission Distance: 5
This print uses 2 filaments
Swap Instructions:
Start with Black
At layer #18 (1.6mm) swap to White for the rest.
Comment & Rating (3)
All
nice 👍
(Edited)
The designer has replied
0
Reply
Hello, This is the intention. I didn't want it smooth; I wanted it to have a 3D effect with bumps so you could feel it. It should be the same as in the photos.
0
Reply
ok thanks for clearing it
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld