snoopy_van_Gogh_Starry Night by tommy

tommy

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Designer

26.1 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Black Transmission Distance: 0.3
Dark Blue Transmission Distance: 1.2
Pop Blue Transmission Distance: 1
JAYO White Transmission Distance: 2
Basic Orange Transmission Distance: 5
Basic Yellow Transmission Distance: 6
Red Transmission Distance: 1.5
Basic White Transmission Distance: 3.5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Dark Blue
At layer #17 (1.44mm) swap to Pop Blue
At layer #22 (1.84mm) swap to White

At layer #25 (2.08mm) swap to Orange
At layer #27 (2.24mm) swap to Yellow
At layer #31 (2.56mm) swap to Red
At layer #34 (2.8mm) swap to White for the rest.

Comment & Rating (2)

@user_2522361746

The white let a lot of the red bleed through. Snoopy looks pink. Note also that at layer 22 it isn't white but a lighter blue. I used sky blue. My colors were black, eSun blue, Bambu cyan, Elegoo sky blue, Bambu orange, yellow, red and white.