Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.24mm

The Max Depth is 2mm and the Actual Depth is 1.8mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 5.7

PLA+ Sunlu Blue Transmission Distance: 0

PLA+ Sunlu White Transmission Distance: 0.7

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Blue

At layer #11 (0.96mm) swap to White for the rest.