Thundercats Liono - HueForge
Copyright Claim
Thundercats Liono - HueForge
Boost
2
6
1
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.8 h
1 plate
Open in Bambu Studio
Boost
2
6
1
0
6
3
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.2mm and the Actual Depth is 0.8mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Jade White for the rest.
Comment & Rating (1)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
printed well. the image is a little faded, but that might just be my lack of experience printing Hueforges
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld