Pliers Holder for the HSW

Compacts holders for pliers' that can be printed without support.

Easy to Snap to your Honeycomb Storage Wall.

2 Different Model, 7 variations.

Pliers Dimension

This holder is designed based on the generic small pliers like those that come on Original Prusa 3D printers.

• A About 130mm (5") approximately.
• B About 60mm (2.5")
• C Can have up to 25 mm (1") width when it is in close.
• D Maximum 8 mm (5/16").
• E Less than 20mm (¾").

Print orientation:

Print flat as the image shows. No needs support.

Print Settings:

• Material: PLA/PETG
• Layer height: 0.2
• Perimeters: 4
• Infill density: 25%
• Outer brim 2mm

Happy Printing!!!