There are 2 choices for sleeved or non-sleeved cards box.stl please print 1 of these box.
You need to print 10-14 sets of Divider.stl upon how do you divide each card type. Please make sure that it's printed with enough layer to hold its shape. I recommend at 0.2mm layer height that would give you 4-5 layers thick.
The center part of box is the place I use for keep silica gel bag.
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%