This remix of the Star Wars Jawa's Scavenger Lamp transforms the original modular design by integrating an ESP32 with RGB light strips into Rings 1 and 3, offering a modern twist to the iconic Star Wars-inspired lamp. The remaining components, Rings 2, 4, the screen, and the top cap, remain unchanged and can be downloaded from the original model. With the addition of WiFi control and Home Assistant integration, this lamp provides customizable lighting effects to bring the force to any personal space.

Key Features:

• Modified Rings 1 and 3 for RGB light strip and ESP32 integration
• Original design elements from the Star Wars universe in the unchanged components
• WiFi control and Home Assistant integration for easy customization
• Vibrant, customizable lighting with RGB light strips
• Modular design for easy assembly and interchangeability

Printing Details:

• Recommended filaments: PLA+ & Silk PLA for the modified parts
• Hotend: 0.4mm Hardened Steel
• Total Print Time: Less than 12 hours for modified parts
• Supports may be required for certain components

Materials:

• ESP-WROOM-32
• ESP32 Terminal Breakout Board
• JST Connectors
• WS2812B 5050SMD LED Strip
• Barrel Power Jack
• Micro USB Connectors
• Power Supply

Software:

• WLED Library

Assembly:

1. LED Tower Preparation:

• Cut a 41-LED strip and solder a JST connector to it.
• Wrap the LED strip around the LED tower and thread the connector through the base hole.

2. Base and ESP32 Preparation:

• Install WLED on the ESP32 as per the instructions on the website.
• Connect the JST connector to the breakout board (Ground to Ground, 5V to 5V, Data to pin 16).
• Solder the barrel connector to the micro USB connector and glue it in the base.
• Screw the breakout board into the base, insert the ESP32, and plug in the micro USB.

3. Final Assembly and Powering On:

• Screw on Ring 2, then Ring 3, threading the JST connector through Ring 3's hole.
• Connect the JST connector to the LED Tower and place the tower within Ring 3.
• Cover the LED tower and screw on the remaining rings.
• Power up the lamp and control via the WLED app (iOS/Android), web browser, or Home Assitant

Integration with Home Assistant:

• The lamp features a WLED integration for Home Assistant, allowing for voice control, custom automations, and more.