Inspired by the Filament spool shelf honeycomb by Maoirae, this 3D printable wall mount utilizes a honeycomb design for a strong and lightweight way to mount your BambuLab AMS on the wall. Frees up valuable bench space and keeps your AMS organized!
Features:
Securely mounts BambuLab AMS to your wall
Honeycomb design for strength and reduced weight
Inspired by the popular honeycomb design used on the HSW
Printing:
This wall mount has been tested successfully with PLA on high-density settings (5 walls, 35% Gyroid infill). If you use PETG/ABS/ASA, you can reduce this and save material and print time.
Required:
Material:
4x M3 Ruthex (or same-sized M3x5.7) inserts
4x M3x8 countersink screws
4x Dowel with 6mm diameter and 50mm length
4x Wall Screws with 4,5mm diameter and 60mm length
Tools:
Drill
Soldering Iron
Soldering Iron Tips for Ruthex Thread
Bill of (Printed) Materials:
Description
Amount
Picture
Shelf Angle
2x
Option 1
Top Holder with Honeycomb Design
2x
Option 2
Top Holder without Honeycomb Design
2x
Optional
Screw Template
1x
Note: You only have to print either Option 1 or Option 2. They are separated by Print Profiles.
Assembly:
Print the Shelf and Top
Insert all M3 Ruthex inserts with a soldering iron
Place the Top Holder on the Shelf
Screw the M3x8 screws in the top holder and into the Shelf
Do not screw them to tight or the filament breaks!
Use the Screw Template to measure at the wall the distance for the holes and drill holes in the wall
The optimal distance between the two Shelfs is 360 mm measured from the middle of the drill hole
Insert Dowles, Screws and fix the shelfs
A little hint for beginners who often ask how to insert “Ruthex inserts” into the printed object:
Changelog:
07/04/2024 - Initial Release with 2 versions
18/06/2024 - Update to the latest AMS of BambuLab (backward compatibility is kept)
Hi @GoldichForge. Sorry for the late reply - I was really busy. My AMS versions seems to be one of the latest versions - I received a brand-new AMS from Bambu 2 weeks ago with the same chamber sizes. I also did print another Mount (only the Check-Part) and I can confirm that this is compatible with my AMS: https://makerworld.com/en/models/70206#profileId-241135
Maybe it makes sense to reuse the way how to hold the AMS and to combine it with your Honeycomb holder
thank you. Please be aware, that because you changed the orientation of the printing they are less stiff. I have orienteded them like this on purpose to optimize the layer adhesion.