Filament spool shelf honeycomb - Free 3D Print Model

Search models, users, collections, and posts

Maoirae

Tools>Organizers

IP Report

Print Profile(18)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Screw Template - 0.2mm layer, 2 walls, 8% infill

Designer

22 min

1 plate

5.0(726)

1" inch spool shelf, 0.2mm layer, 4 walls, 8% infill gyroid

Designer

3.3 h

1 plate

4.9(1.5 k)

23mm Spool shelf , 0.2mm layer, 4 walls, 8% infill

Designer

3.3 h

1 plate

5.0(346)

20mm Spool shelf 0.2mm layer, 4 walls, 8% infill

Designer

3.4 h

1 plate

5.0(522)

Click to see more

Open in Bambu Studio

Boost

10409

27559

4240

2.3 k

29.8 k

19.9 k

Released

Description

Designed my own filament spool shelf in honeycomb design. There are 3 versions, for 1" inch wooden dowel, 23mm dowel and 20mm dowel. Used 2pcs M5 wall screws per bracket, spacing between top and bottom screw is 95mm. Its designed just to slid onto mounted screws, witch should have 5mm space between screw head and wall.

Added template for easier drilling holes and adjust right screw distance, also added plane if you want to you use spirit level.

Added endcap for those whom wooden dowel extends from shelf bracket to prevent filament spool tipping over. Also made divider so you can separate different type of filaments from each other on one shelf and not mixing them accidentaly. Here: https://makerworld.com/en/models/117747#profileId-126576

Also added filament material tags so you can separate different type of filaments from each other, here:

https://makerworld.com/en/models/117775#profileId-126618

Added accessories to utilize honeycomb holes for some holders. link here:

https://makerworld.com/en/models/1129702#profileId-1129747