U can change purple with lavender purple or grass green or purple or other blues as u like it

RESULT WILL CHANGE CONSIDERING YOUR FILAMENTS ( CHECK LAST PICTURE)

File is ready to print, if u want to change frame color swap LASTS layers ( already changed for black frame)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA Eryone Lavender Purple Transmission Distance: 0.7

PLA BambuLab Matte Marine Blue Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Purple

At layer #8 (0.72mm) swap to Marine Blue

At layer #14 (1.2mm) swap to Jade White for the rest.

Reminder:

My models mostly cover the entire bed,
this means the purge line is sometimes
running through the bottom of the print.
You have 3 options here:
- Leave as is, you can just cut them of afterwards.
- Remove immediately after the purge line is printed.
- Scale the model:

*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.

If u want to support my work

https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT

For request send me dm