Mugen89K

0.08mm layer, 1 walls, 100% infill

TheMoistSaltyFry

cover

20240613_114234_2b00107b-5ded-4ca8-a231-1078917db8fa.jpg

20240613_114242_1470ccde-62af-4d81-a4a1-f3e7b65e5978.jpg

20240613_114234_2b00107b-5ded-4ca8-a231-1078917db8fa.webp

plate_1.webp

plate_1.png

Ripped from HueForge:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 180x59.47mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm&nbsp;Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filaments&nbsp;Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to Scarlet RedAt layer #18 (1.52mm) swap to Ivory White for the rest.

I loved both these characters and wanted to do a different scene but this came out nice.

HueForge Naruto Obito and Kakashi Awakening

Global

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

Link Hueforge

Kakashi-Obito Mangekyo Sharingan Coaster

obito

Hinata Hueforge from Naruto