Hi there :-)

This is a pretty cool wall mounting case i made for a Raspberry Pi 3B+. 

You can find a list of all the required parts in the pictures. 

How to mount:

To mount it to a wall (or wherever you want) you can use M3 screws.

The upper and lower part are held together by eight 5x1mm magnets for easy access. Just superglue them into the corners.

For mounting the Pi use M2x4x3,2 mm heat set inserts and M2x4mm screws.

For mounting the 30x30mm 5V Fan use M2,5x4x3,5mm heat set inserts and M2,5x10mm screws (or whatever fits your needs).

Additionally i designed some badges, which you can print and glue on the case.

The following badges are available:

• OCTOPI
• OCTOPRINT
• OCTOPRINT LOGO
• RASPBERRY PI LOGO

Since i gave the case away to a friend of mine, i only have these bad real life photos… 

I will make better ones as soon as possible.

I hope you like the case and can put it to some good use :-)