IT hueforged
Here you can find all my HueForge creations. https://makerworld.com/en/@MicheleMM3D/collections/503504
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 3.9
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #10 (0.88mm) swap to Jade White
At layer #25 (2.08mm) swap to Orange for the rest.