This is an adapter for Amolen filament spools to fit the Bambu Lab A1 Series AMS Lite. Amolen spools are a little loose on the AMS Lite and will fall off, especially in #2 & #3 spots. This solves that problem with a tight friction fit adapter to end the filament fuss.
I printed the main body of these in Sunlu PLA Transparent and added a layered color change to show the infill pattern, which I changed to honeycomb because hexagons are the bestagons. The print profile is setup to print the transparent at 205. Profile also has Arachne wall generation which keeps infill out of the walls with varying line thickness to keep the thin walls clear & smooth since the outer wall is slightly conical shaped to best fit the spool. Since the inside of the spools are slightly conical shaped, the adapter will fit best on one side so if it seems too tight, try the other side. Happy printing.