Articulated Benchy 3D Suspended
Copyright Claim
Articulated Benchy 3D Suspended
Boost
36
63
13
Print Profile(1)
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
3.8 h
1 plate
Boost
36
63
13
3
92
51
Released
Description
Articulated Benchy 3D Suspended
Comment & Rating (13)
All
How small are the lines when even at a 0.08 layer the slicer can't draw and print them?
0
Reply
need .2mm nozzle prb
0
Reply
Replying to @liamrymac
Could have written that in the description. On the contrary, I calculated that 0.4 and 0.6 are better for these bridges. I wouldn't even think of printing these bridges with a 0.2 nozzle.
0
Reply
Replying to @ok2vvv
Hey I made a profile for 0.4mm
0
Reply
i really wanted to print this on my a1 mini and there is a profile for it but due to it needing a .2 nozzle the print fails immediately, can you make one with the .4? so printing is possible, it will print better with .4 aswell with bridges
0
Reply
Hi I made a profile for the 0.4mm nozzle
0
Reply
Boosted
Print Profile
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
it was very good
0
Reply
Print Profile
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
0
Reply
Boosted
Print Profile
0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 2 walls, 15% infill
Other Issues:string everywhere
0
Reply
No more
License
This user content is licensed under a
Creative Commons Public DomainRelated Models
© 2024 MakerWorld