Updated to match the original nozzle wiper support (which can flex). I recommend using super glue (after you attach to the printer) to hold the A1 wiper down.
After using this one: The Nozzle Wiper V2 - X/P Series by Maleko - MakerWorld, I decided to make my own since that one gets pushed around. This one can be screwed into the slot where the old nozzle wiper is. You need an Heatbed Nozzle Wiper - A1 ($2.99 on Bambu Labs at the moment) that you cut in half. I now see that there is another similar version The Nozzle Wiper - X/P Series by Maleko - MakerWorld, so use whichever you think works best.
Probably best to print in PETG or some other higher melting temp filament so it doesn't deform or melt.