Wallmount for Bambu AMS 3 Slot Version by StefanWox

StefanWox

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.1 h

2 plates

5.0(4)

Boost

Released

Description

Attention! There seem to be several versions of the AMS where the slots differ from this version.

This is a alpha Version of my mount based on the measuring of another Makerworld User! This Version SHOULD fit the AMS with 3 slots with the following measurement: 65mm/86mm/65mm
Please check before printing if the version fits. I try to get the dimensions of the other version and will then upload the bracket in the adapted version!

I added a design drawing with measurements please check it!

Nothing special - just a quick Design to mount the AMS on the wall.

Works fine for me. If there are any Problems, don't hesitate to contact me!

Recommended print settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% infill with ABS

For example https://www.nobufil.com/abs-filament which is currently the best ABS i know! Perfect layer bonding, ok smell, great colors (even Sparkle ones) - and recycled out of industrial ABS. No, i'm not working there, just impressed.

Comment & Rating (7)

@Jtmakesstuff

so this fits almost perfectly, however on the 1st plate for the left side of the AMS(if your facing it) you forgot a fillet in between the part that slides into the ams. it applies to much pressure and just barely broke the tip of the support in the ams as it slides in ever so slightly.

@zeemyself

@StefanWox Any update for part2.stl?

@ch.chevalier33

Print Profile

0.2mm layer, 2 walls, 15% infill

super impression j avais une bobine abs de marqué inconnu que jamais j ai pu utiliser correctement sur mes autres imprimantes

@freddyflv

What you could do is redesign the model in two parts: one that hangs on the wall and the second one that connects to the AMS thus being able to create the different versions. Then both of them can be put together with screws. Just an idea...