The Kiss - Gustav Klimt (hueforge)
Copyright Claim
The Kiss - Gustav Klimt (hueforge)
Boost
3
10
1
Print Profile(2)
116x150mm 0.08mm layer, 2 walls, 100% infill
Designer
3.6 h
1 plate
58.20x75mm 0.08mm layer, 2 walls, 100% infill
Designer
1.3 h
1 plate
Open in Bambu Studio
Boost
3
10
1
0
8
3
Released
Description
This is my try at “The kiss ” by Gustav Klimt in hueforge, just using three colors
There is a print profile for 116x150mm size and a print profile for 58.20x75mm size
if you modify something on the slicer be careful not to touch the purging values (gold to white must be set to zero)
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gold
At layer #14 (1.28mm) swap to Jade White for the rest.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Sunlu Gold Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Comment & Rating (1)
All
Print Profile
116x150mm 0.08mm layer, 2 walls, 100% infill
needs green and red filaments
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld