Shaoling Kung Fu Club logo out of a sketch.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Jade White
    At layer #9 (0.8mm) swap to Black
    At layer #17 (1.44mm) swap to Jade White for the rest.