Enter the Dragon Bruce Lee movie poster fridge magnet.

Measuring 66mm wide by 96mm high by 5mm deep

This model requires 2 x AMS units to print

colour Bambu AMS print using Black, White, Red, Brown, Silver silk(Ash Grey should work instead), and Lemon Yellow

This needs 4x 8mm diameter by 2mm deep magnets, the magnets push into the model after printing, no need to pause.

NOTE - The magnets are designed to be a tight fit. The best way to insert them is to line up a magnet with a hole then place the model on a hard flat surface facing up, with the magnet on the hard surface, then press down firmly on the model. The magnet will snap into place. Repeat for each magnet.