Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal, PLA Bambu Lab Basic Blue, PLA BambuLab Basic Jade White, PLA BambuLab Basic Yellow
Swap Instructions:
Start with Charcoal, At layer #6 (0.56mm) swap to Blue, At layer #17 (1.44mm) swap to Jade White, At layer #21 (1.76mm) swap to Yellow, At layer #24 (2mm) swap to Jade White