Decorative image of a portrait of scarecrow boy. Perfect wall art for Halloween.
Art generated through Midjourney and refined for 3D printing through Hueforge.
Check out my frame options in the links below
https://makerworld.com/en/models/49964#profileId-51734
https://makerworld.com/en/models/40145#profileId-39785
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.5
PLA BambuLab Basic Orange Transmission Distance: 11
PLA BambuLab Matte Ash Gray Transmission Distance: 7.6
PLA BambuLab Basic Jade White Transmission Distance: 16
Swap Instructions:
Start with Charcoal
At layer #3 (0.32mm) swap to Orange
At layer #11 (0.96mm) swap to Ash Gray
At layer #12 (1.04mm) swap to Jade White for the rest.
Your last slider is set to 1.2mm which is lower than the model height.