Vault Boy Hueforge by the_bearded_jedi

the_bearded_jedi

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

4.3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Matte White Transmission Distance: 3.7
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Marine Blue
At layer #11 (0.96mm) swap to Savannah Yellow
At layer #16 (1.36mm) swap to White for the rest.

fallout

vault boy

hueforge

Comment & Rating (3)

@rlayton

My first stunning hueforge. How did you nail the colors on this one?

The designer has replied

@thebeardedjedi

Thanks man! I usually find the image, enter it into hueforge, get it close to what I like. Sometimes I need to edit the picture to get the colors I want