Hueforge frame for 200x200 mm pictures - with magnets by Madness3D

Madness3D

Art>2D Art

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 5% infill

Designer

1.3 h

1 plate

4.5(10)

0.24mm layer, 2 walls, 5% infill

Designer

1.3 h

1 plate

4.8(4)

Boost

189

109

Released

Description

NB! this model does not include the picture.. It only includes the frame.

I have designed a frame meant for hueforge pictures of the size 200x200 mm.

Each side has holes for magnets (6x2) press fit.

Remember to insert your magnets with the correct polarity on each side as you can insert them with the wrong polarity.

Let me know if any you want me to create other sizes.

A version for assembly without magnets is in the making and will come soon.

For hueforged midjourney art and pictures please see my other uploads.

Comment & Rating (24)

@mbaggerc

Hi. Could you do me a favor and make a frame same size (for 200x200mm picture) but in one piece and with backplate and with possibilities to hang? The edge around just needs to be 5 mm. I have tried but unfortunately didn't succeed. Thank you very much in advance.

(Edited)

The designer has replied

@Madness3D

Hi mate, I'll try to design a 200x200 frame with a backplate which locks the picture in the frame with options for hanging it vertically and horizontally. Maybe also with a desk stand option. I have some ideas on how to resolve it, but have to make a few prototypes to see if I can get it to work :) Give me a day or two and I should have a design ready :)

@mbaggerc

Replying to @Madness3D :

Thank you very much :) Afterwards I also thought about desk stand option, that would be awesome too :)

@mbaggerc

Replying to @Madness3D :

Hi, how is it going. Did you manage to make something great? :)

@RockyPrattistic

Print Profile

0.2mm layer, 2 walls, 5% infill

I had to design small dowels to fit the corners so I could glue it together.

(Edited)

@bugy234

Print Profile

0.2mm layer, 2 walls, 5% infill

@rlbol767

What colors did you use in the picture?

The designer has replied

@Madness3D

i used the following. PLA BambuLab Matte Charcoal Transmission Distance: 0 PLA BambuLab Matte Ash Gray Transmission Distance: 15 PLA BambuLab Matte Mandarin Orange Transmission Distance: 6.3 PLA BambuLab Basic Jade White Transmission Distance: 7.5 The picture it self is uploaded separately in my uploads together with a few other hueforged pictures :)