This is my first upload, after only owning a 3D printer and modelling for less than a month. After reading about the current draw issues with some of the LED strips (https://www.aliexpress.us/item/3256805766261317.html), I thought shortening the strip should address the issue (but don't blame me if you have issues!). This takes 8mm x 3mm magnets - I thought it would need 5, but 3 seems to be enough. I also thought glue would be needed, but the magnets I bought stay put after applying some pressure to push them in. I could have possibly angled the LED down a bit more, but this seems fine.