This secret easter egg is perfect for storing your chocolate eggs. It is 12.3 cm tall and a little under 10 cm in diameter. It uses 12 5*2mm round neodymium magnets to attach the two parts (6 for each side).

Print Instructions:

Start printing the parts as oriented in the STL files, pause the print at layer 23/24 if printing at 0.2 mm layerheight and then insert the magnets (Make sure that the magnets are in the correct orientation, north pole pointing up for one half and down for the other).

I recommend printing with a maximum of 0.2mm layerheight and the model is designed to be printed with a 0.4mm or smaller nozzle. The model requires some tree supports, make sure no support material is generated in the magnet holes in your slicer.

Have fun!