AU Power Plug Protector
Print Profile(1)
Description
AU power plug protector.
It's been designed to be snug but not tight.
Print Profiles:
- Print Face Down
- Must be printed at 0.16 layer height.
- 0.20 will be too tight
- 0.12 will be too loose
If you're finding it a little snug then try 0.12 layer height. Too loose try 0.20mm. This might be required of filaments with a lower tolorance (eg. 1.75mm +/-0.05mm as opposed to brands like sunlu which has a +/- of 0.02mm tolorance) or filament thats not properly calibrated (over extrusion will make it tight, under extrusion will make it loose).
Great for anything that you pack away where you dont want the prongs getting damaged or bent.
Also prevents the metal prongs from scratching other bits of equipment. Originally designed for someone with a digital SLR camera where they didnt want the plug scratching their camera lens.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)