Hex Wallart
Print Profile(1)
Description
You will need #6 Screws and superglue
The screws will be to hold the baseplate onto the wall.
The pieces slide directly onto the baseplate
The glue will be to hold the pieces together.
The pieces are light enough to be held by only glue.
If your wall is large, you may need to print multiple baseplates to anchor to the wall.
This is not to prevent it from falling, but to prevent them from rotating.
If you are only putting up how many i have shown in the model cover, one baseplate is enough.
The entire assembly should be glued on a table or on the floor before putting it up on the wall.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)