Mini Shelf

Mini Everything Shelf

• Print time: ~90 minutes (if using fast settings)
• Supports: Not needed if printed on its back
• Raft/Brim: No
• Print‑in‑place: Yes
• Material: PLA or PLA+
• Easy Filament Swap: Not applicable

Print difficulty rating: 4/10

Advice: Print on it's back so it won't need supports.

For optimal print time, try these settings:

• Line infill (5 - 10%)
• Overlap angle (infill) - 90 degrees
• Bottom solid layers - 3
• Top solid layers - 3

Other notes:

• Requires basic adhesion
• Requires some cooling

Great print, it's not really hard at all, just focus on reducing the print time.

*No print time or slicer settings are guaranteed to be accurate or provide desired results. Try them out and see how it goes!