Dice Case

I wanted a dice case that would fit enough dice to cover the majority of cases in D&D without needing to reroll dice.

At the same time, I wanted the case to be as compact as possible, and I didn't want to waste extraneous space on a pencil or miniature holder.

Also, I wanted something that didn't need assembly and extra hinge parts. I settled on using 5x5 cylinder magnets to latch the box closed.

If you don't like the inlay on the cover, you are free to remove it, or replace it with any SVG you like. I suggest having at least one side inlaid, so you can identify which side is up, so that when you open the case, you don't have all the dice in the rolling tray.

Immediately after printing (I used marble PLA and bronze PLA), the hinges will be a little stuck, but with a little pressure (not too much, please!) will break free and move smoothly. I suspect if you print with PETG, they will stick even more so.