NOTE: If you change its size, manipulate it without changing the z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 4.1
PLA BambuLab Basic Red Transmission Distance: 4.7
PLA BambuLab Basic Yellow Transmission Distance: 8.4
PLA BambuLab Basic Jade White Transmission Distance: 4.4

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #16 (1.36mm) swap to Jade White for the rest.