I created Phil Taylor's player card in Hueforge. Have fun with it!

If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 1.5
PLA Cream White Transmission Distance: 3
PLA White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Cream White
At layer #17 (1.44mm) swap to White for the rest.