Death Star - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #10 (0.88mm) swap to Blue
At layer #15 (1.28mm) swap to Jade White for the rest.