P1S/P1P Overture TPU Config File by BillyMayonaiz

BillyMayonaiz

3D Printer>Test Models

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Overture TPU

Designer

1.5 h

1 plate

4.9(63)

0.2mm layer, 3 walls, 15% infill, A1 mini

1.2 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

145

276

743

500

Released

Description

Hello!

The 3mf of this benchy can be imported to either Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for TPU printing, specifically Overture (as it is a low entry price for TPU). As a breakdown:

Filament Profile: Overture TPU - Black: This config is for the filament. The print shown above is done with recently opened TPU from Overture (like the morning before posting this), so if you get different results with blobs/underextruding, dry your filament.
Print Profile: 0.20mm Standard - TPU: This config is for all the process settings. Basically, the main thing is that the printer will be printing slow. It needs to to be able to print TPU reliably.

This print was made with only the part cooling fan. If printing with a P1S, just make sure to open either your top cover or the front door to allow for ventilation. I also am running stock everything else, so whatever machine you got out of the box, this profile should be close enough to work.

Hope this works!

*Obligatory benchy included for print model

Comment & Rating (79)

@user_2053203187

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill, A1 mini

great print profile

@jbennett1234

why so slow ,30mms my bambu p1s prints between 200/300 on overture tpu if you calibrate the profile it'll handle printing fast it aint an ender !

(Edited)

@bimmerfreak10

Would you mind sharing the settings you use to print TPU this fast? I'd like to test it myself as it would be amazing to print TPU so quickly without clogs.

@c.henry.367

Replying to @bimmerfreak10 :

It shouldn't be clogging under normal conditions. Be sure that your filament is dry, TPU loves to suck up water.

@bimmerfreak10

Replying to @c.henry.367 :

eibos dry box for 12 hours, both overture tpu and duramic tpu, default tpu setting with volumetric flow turned down, clogged every time I’ve attempted. only tried about 6 times before I gave up and bought a bedslinger just for tpu. More info just in case you see the fault I’m making. dried and printed from drying box fed from external spool, not ams pei textured plate temp ranged from 215-230 on the attempts using orcaslicer the easy thing to do would be to post a 3mf of your settings on a sliced cube and let me try it. Would love to get it working to be honest, but got tired of disassembling my extruder.

@ben.cobb

Print Profile

Overture TPU

Squishy boat! Very little stringing(I’ve had worse on an Ender running PLA😂) Will continue to use this profile for other TPU projects I find. Thank you! P.S. I’ve found overture TPU runs best at 230 on my A1.

@Capa

Print Profile

Overture TPU

Amazing profile, but a bit slow.

@user_1995612070

Print Profile

Overture TPU

worked great

@Michal_3Dtisk

Print Profile

Overture TPU

no problemo👌🏻

@presantg

Boosted

Print Profile

Overture TPU

my go to tpu profile. worked great with Duramic tpu

@user_751683823

Print Profile

Overture TPU

benchy came out great. great profile.

@topxnbo

Print Profile

Overture TPU

worked surprisingly well on a giantarm TPU. my go-to TPU profile

@Malork

Print Profile

Overture TPU

my first time using TPU and went with Overture Black. with the provided profile it printed wonderful! Curious to see how other objects will go. happy easter!