Batman hueforge from ink by Bunk.Wire

Bunk.Wire

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

1.8 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Bat hueforge

*created with filament painting technique using hueforge software.

Remember if you want to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Beige
PLA BambuLab Basic Jade White

Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Beige
At layer #22 (1.84mm) swap to Jade White for the rest.

batman

batman art

Comment & Rating (6)

@GhostPrint89

do I need the software from hueforge or can I just print and go?

The designer has replied

@Bunk.Wire

nah, its presliced, so setup your colors in according słots and you are ready to go

@GhostPrint89

Replying to @Bunk.Wire :

thank you. I have seen so many hueforge things and it’s been so confusing. so setup and go got it!

@Monty

The picsa show a nice black and white image, why the Beige and blue ?

The designer has replied

@Bunk.Wire

to add some depth. But i can add Black White version

@Monty

Replying to @Bunk.Wire :

Ahh I see, , Still learning and tips like that are good :) So use up the old scraps of filament and give some subtle tones maybe, depending on the transparency of the white :) Black White Grey would be nice :)

No more