The Colosseum - Double Hueforge

Recreate the Colosseum and hang it on the wall at home!

With this double hueforge, with just 4 steps you can have a Hueforge reproduction of the Colosseum in Rome.

Hueforge print Instruction:

Background:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Coffee Transmission Distance: 3
PLA+ Esun Bone White Transmission Distance: 6
PLA+ Esun Light Blue Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Coffee
At layer #14 (1.2mm) swap to Bone White
At layer #16 (1.36mm) swap to Light Blue
At layer #21 (1.76mm) swap to Bone White for the rest.

Colosseum:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Red Transmission Distance: 6
PLA+ Esun Yellow Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6
PLA+ Esun Yellow Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #17 (1.44mm) swap to Bone White
At layer #22 (1.84mm) swap to Yellow
At layer #23 (1.92mm) swap to Bone White for the rest.