Honeycomb SILICA DRY (or weight) BOX BAMBU SPOOL with thread no interference with AMS
Copyright Claim
Honeycomb SILICA DRY (or weight) BOX BAMBU SPOOL with thread no interference with AMS
Boost
25
63
27
Print Profile(2)
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
Designer
2.6 h
1 plate
0.24mm layer, 2 walls, 10% infill - PLA - SINGLE COLOR - FAST PRINT
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
25
63
27
3
113
87
Released
Description
Silica container for bags or beads to use inside spool.
Can also be used to ad weight when necessary.
No interference with ams, very slik desing.
Hexagon Holes of 1.5mm
Can print single or multicolor with bambulogo
Comment & Rating (27)
All
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
fantastic
The designer has replied
0
Reply
thanks for the rating apriciate it
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
ok
The designer has replied
0
Reply
thanks for the rating have fun using it
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
Top and bottoms need another 3-5mm more of material. If I knew how to add remixes I would provide it.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
Ech lieben Honeycomb. Saupraktesch a passt gutt op Bambu Filament
0
Reply
bottoms of each piece around the logo came out a bit odd, maybe first layer needs to be a little thicker? Printed on a P1S with PEI plate.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
Passt perfekt
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
These came out very nice in basic matte charcoal PLA and green PLA. I did find that the hex corners of the lids seem a little fragile because of the material and thickness and I would make 1mm thicker personally or would try PTEG if I were to do it again. Also found these work great in Bambu spools but may not fit other third party spools.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
gute teile 👍
0
Reply
Print Profile
0.24mm layer, 2 walls, 10% infill - PLA - SINGLE COLOR - FAST PRINT
Very useful
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill - strength - multicolor -PLA
The designer has replied
0
Reply
thanks for the rating hope its usefull
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld