This is a part for ender 3 that extends the bar at a angle that way you dont lose space when you get a direct drive extruder like the microswiss direct drive kit. Is also useful if you just need to maximise your print volume. It can be angled twards or away from front. If you install it like I did on the back side then you will need the spacer that way it doent rub on the lead screw on the back. It shouldent matter if you angle it twards the front of the printer. Use this at your own risk and I will continue to improve the design. Also use as much infill as you can to make it strong. I recomend pla or abs because it is stiffer than outher plastics. You also will need 4 more M5 bolts same size as the outhers.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Infill:

50% or more

Filament:

HatchBox Pla or Abs

Category: 3D Printer Accessories