With this filament drying cover you can dry more than just one spool in the buildingspace of the printer (X1 series) at the same time.
The rings can be stacked accordingly; a maximum of three of these rings fit on top of each other in the buildingspace of the X1C.
The lid is simply attached on top.
The ventilation slots on the underside of the ring, as well as the holes on the lid allows a easy air circulation inside the drying room, so that any possible moist air can be exchanged.
!! I strongly recommend printing the rings and lid in polycarbonate (PC) to accommodate the temperature of the heatbed when drying. !!
Mit diesem Filament drying cover könnt ihr mehr als nur eine - bis zu drei - Spule(n) im Baumraum des Drucker (X1-Serie) gleichzeitig trocknen.
Die Ringe sind entsprechend stapelbar, es passen maximal drei dieser Ringe aufeinandergesteckt in den Bauraum des X1C.
Der Deckel wird einfach passend aufgesteckt.
Die Ventilationsschlitze an der Unterseite des Rings, sowie die Bohrungen am Deckel ermöglichen eine leichte Luftzirkulation im Inneren des Trockenraums, sodass auch der Austausch möglicher feuchter Luft gewährleistet ist.
!! Ich empfehle dringend, die Ringe und den Deckel in Polycarbonat (PC) zu drucken um der Temperatur des Heizbetts beim Trocknen gerecht zu werden. !!
Recommended and tested print settings:
Material: PC
Layerheight: 0,24 mm
Brim at the rings (in .3mf included)